EHI hdp sssa Gravure Japanese_Newspaper_OEM_Engine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 The head dependent part of the total sub scan shift. The total sub scan shift is the sum of "gc sss", "mode sssa" and "hdp sssa". As the focus beam is used to find the edge of the plate, part of the sscan shift is dependent on the head, not the rest of the system. This calibration value is stored in the head nvs; therefore, when a head is swapped in the system, the sscan shift adjust does not need to be modified on the MPE. In practice you still need to check it by doing the inch grid plot and checking the location with a measuring jig. Note that this used to be "gc sssa cal". For green heads, the parameter is still "gc sssa". This parameter is available.

Please issue the appropriate monitor command to determine this parameter's default value.

Please issue the appropriate monitor command to determine this parameter's minimum and maximum values.

07-May-2002 Normal

..\..\ShowAllErrors.htmFirmware 1 Error Index

..\..\ShowAllCommands.htmFirmware 1 Command Index

..\..\ShowAllParameters.htmFirmware 1 Parameter Index

Updated: Thu Jul 17 07:23:57 2008 PST